MonteSS Posted June 29, 2012 Report Share Posted June 29, 2012 One of my biggest problems with using the twinjector was drawing up the plastic, especially when the cup is getting low. I would always hit the bottom of the cup. I made this simple jig from plywood and a 2 x 4. It leaves about 1/4" between the nozzle and the cup. Works great. ....Bill 1 Quote Link to comment Share on other sites More sharing options...
Romeo D Posted June 29, 2012 Report Share Posted June 29, 2012 Great thinking Quote Link to comment Share on other sites More sharing options...
Frank Posted June 29, 2012 Report Share Posted June 29, 2012 (edited) That gives me a good idea too. Thanks for sharing Frank Edited June 29, 2012 by Frank Quote Link to comment Share on other sites More sharing options...
DaBehr Posted June 29, 2012 Report Share Posted June 29, 2012 Brilliant! There's that third hand I need ! Quote Link to comment Share on other sites More sharing options...
Fishoey Posted June 29, 2012 Report Share Posted June 29, 2012 Fantastic idea! I need to do something like that for my single shoot injector too. Thanks for sharing! Quote Link to comment Share on other sites More sharing options...
