barrysbaits Posted September 28, 2012 Report Share Posted September 28, 2012 Has anyone tried this blend of soft and medium plastisol. If so what is your opinion? Thinking of buying some just wanted a first hand opinion. Quote Link to comment Share on other sites More sharing options...
smallmouthaholic Posted September 28, 2012 Report Share Posted September 28, 2012 (edited) It's a good,heavier/stronger blend for sure. That said,make sure you stir or shake the hard pack on the bottom of the container before using. Edited September 28, 2012 by smallmouthaholic Quote Link to comment Share on other sites More sharing options...
Duane's Custom Baits Posted October 4, 2012 Report Share Posted October 4, 2012 It is great, I use it alot. And yes you do need to stir it up good, I buy it in the 5 gallon bucket and then brake it down myself into 5 1 gallons, stir it everytime I use it just like I do all there plastics. Quote Link to comment Share on other sites More sharing options...
smallmouthaholic Posted October 4, 2012 Report Share Posted October 4, 2012 Neither Chemionics,Calhoun's or Pourasoll equire the amount of shaking and stirring to loosen the hardpack associated w/ Lurecraft plastisol. I've experience d the hard pack in the 1 gallon container take 5-10minutes of very vigrous shaking to loosen and mix. you will need on of these if it sits in a 5 gallon container fpr a couple of months. Quote Link to comment Share on other sites More sharing options...
smallmouthaholic Posted October 4, 2012 Report Share Posted October 4, 2012 Here''s the best 5 gallon pale stirrer I've ever used for plastisol hard pack- http://www.amazon.com/dp/B003U6H7I4/ref=asc_df_B003U6H7I42207779?tag=thefind0010300-20& Quote Link to comment Share on other sites More sharing options...
Bass-Boys Posted October 5, 2012 Report Share Posted October 5, 2012 awesome looking stir... that you can use with the lid on the 5 gal pail !!! Quote Link to comment Share on other sites More sharing options...
smallmouthaholic Posted October 5, 2012 Report Share Posted October 5, 2012 (edited) I cut a 3" diameter circle out of the center of the pale w/ a box cutter,then insert the drill attached stirror and "fire away",reversing directions. Then I use this- http://www.walmart.c...-Pump/15125755 to pump the plastisol into smaller containers.Leave 3" of clearance in the smaller 1 gallon containers to permit easy shaking and distrubution.Then cut a V w/your box cutter to the edge of the lid on the 5 gallon container to pour out the remaining plastisol the pump won't remove. The sirror will fit inside the screw off cap on a Pourasol(spike -it )2 12 gallon container and getting any settling off of the raise ribs on bottom of the container. Edited October 5, 2012 by smallmouthaholic Quote Link to comment Share on other sites More sharing options...
Duane's Custom Baits Posted October 5, 2012 Report Share Posted October 5, 2012 Hello smallmouthaholic, both of those look like they will work great I normally stir it up with a broken broom handle that has a nice flat edge to it, I use it in my 5 gal and 1 gal, I'm going to have to look into getting me one of each. Quote Link to comment Share on other sites More sharing options...
