LIARS CORNER Posted January 9, 2013 Report Share Posted January 9, 2013 (edited) my plastic pots and vent i had made. my lead pot and vent i had made, if i put it on high it will pull so much air it cools the lead and it want pour i have to run it on low it also has a plastic shield so you can see and only your arms are near the pot Edited January 9, 2013 by LIARS CORNER 3 Quote Link to comment Share on other sites More sharing options...
Jig Man Posted January 9, 2013 Report Share Posted January 9, 2013 That sure is a nice setup. Congrats. Quote Link to comment Share on other sites More sharing options...
mark poulson Posted January 9, 2013 Report Share Posted January 9, 2013 Very nice!!! Quote Link to comment Share on other sites More sharing options...
JSC Posted January 9, 2013 Report Share Posted January 9, 2013 Looks Good Quote Link to comment Share on other sites More sharing options...
smallmouthaholic Posted January 9, 2013 Report Share Posted January 9, 2013 It's good to see one concerned about breathing the fumes vs. the open garage door method. Very nice set-up. What is the diameter size of the fan and the cfm rate? 1 Quote Link to comment Share on other sites More sharing options...
liarscorner Posted January 9, 2013 Report Share Posted January 9, 2013 i dont know the exact size of the fan but its a blower out of a HVAC unit most of my family (not me) is in the HVAC field they own 2 companies so i ask one of them to make them for me i have been using the lead pot vent for a long time now but the plastic pot vent is new they move a LOT of air my wife helps me in my shop so i wanted it to be as safe as i can make it for her 1 Quote Link to comment Share on other sites More sharing options...
Ferree Posted January 9, 2013 Report Share Posted January 9, 2013 Awesome setup. Good luck! Quote Link to comment Share on other sites More sharing options...
Painter1 Posted January 9, 2013 Report Share Posted January 9, 2013 Wow. That is nice. Is the fan variable speed? Quote Link to comment Share on other sites More sharing options...
J lure Posted January 10, 2013 Report Share Posted January 10, 2013 I'll take two Quote Link to comment Share on other sites More sharing options...
liarscorner Posted January 10, 2013 Report Share Posted January 10, 2013 yes the fan is variable speed i dont have a switch wired in yet Quote Link to comment Share on other sites More sharing options...
kevtherev Posted January 10, 2013 Report Share Posted January 10, 2013 That looks terrible. Not. You should be proud! Quote Link to comment Share on other sites More sharing options...
RayburnGuy Posted January 10, 2013 Report Share Posted January 10, 2013 I don't pour lead or plastics, but do recognize good work when I see it. Your setup is definitely one to be proud of. Ben Quote Link to comment Share on other sites More sharing options...
Kajan Posted January 12, 2013 Report Share Posted January 12, 2013 Looks bon', should work just fine. Do you have a fresh air intake for the room? Quote Link to comment Share on other sites More sharing options...
plt Posted January 17, 2013 Report Share Posted January 17, 2013 very nice Quote Link to comment Share on other sites More sharing options...
