marshad Posted February 12, 2013 Report Share Posted February 12, 2013 If I put a coat of etex on a bait paint it. Then would it be ok to do my final 2 layers of clear with ex74? Thanks Quote Link to comment Share on other sites More sharing options...
BobP Posted February 13, 2013 Report Share Posted February 13, 2013 No idea what EX74 is, but I'm almost certain that it will be OK. Once an epoxy has cured, it is very resistant to any further chemical reaction, which makes it one of the very best undercoating agents. Quote Link to comment Share on other sites More sharing options...
marshad Posted February 13, 2013 Author Report Share Posted February 13, 2013 EX74 is made by the same company as etex. Basically its etex that cures faster and has uv inhibitors. I'll try it and see how it goes. Quote Link to comment Share on other sites More sharing options...
spoonpluggergino Posted February 13, 2013 Report Share Posted February 13, 2013 Yes Envirotex Lite and EX-74 (UV) are made by the same company E.T.I. Environmental Technology Inc. EX-74 is their industrial grade epoxy clear among a all bunch other stuff they make, The big difference is that EX-74 is uv resistant and only comes in a gallon size around 174.00 dollars per gallon This winter when I went to the muskie show at Harper college in Illinois I was asking a vendor what clear they were using and EX-74 UV came up, that is what he used to clear their baits Here is ETI website www.eti-usa.com Gino Quote Link to comment Share on other sites More sharing options...
