Coonhound Posted March 1, 2013 Report Share Posted March 1, 2013 Anyone know if a Mustad 91768 will fit in the new Do It FBB-4T-ASU? I'm not afraid of convincing it to fit with the Dremel. Quote Link to comment Share on other sites More sharing options...
smalljaw Posted March 1, 2013 Report Share Posted March 1, 2013 That mold won't take that hook and a dremel isn't going to work. The reason is the hook is a 28 degree bend while the mold takes a 60 degree hook. If you like the EWG on the 91768 then get the new Eagle Claw L111BP, is is super strong, nasty sharp and has the EWG bend and most important is it will fit in the mold with no modification needed. Quote Link to comment Share on other sites More sharing options...
Coonhound Posted March 1, 2013 Author Report Share Posted March 1, 2013 Ah ha. That's an even better plan. Thanks smalljaw! Quote Link to comment Share on other sites More sharing options...
flippinfool Posted March 6, 2013 Report Share Posted March 6, 2013 Anyone know if a Mustad 91768 will fit in the new Do It FBB-4T-ASU? I'm not afraid of convincing it to fit with the Dremel. That hook will fit. Just a slight bend is all it takes. You will have to mod the hook eye area. Just use a dremel to take out some material around the hook eye. Quote Link to comment Share on other sites More sharing options...
