Bassinjunkie88 Posted March 5, 2013 Report Share Posted March 5, 2013 I have 2 Medium injectors from Caney Creek Molds and I was wondering if anyone knows if the blending block from Bass Tackle would work for this? Here's a link to the block: http://www.basstackle.com/Blending_Block_p/blendingblock1.5.htm Quote Link to comment Share on other sites More sharing options...
Bassinjunkie88 Posted March 5, 2013 Author Report Share Posted March 5, 2013 Yes and no. The thing about the Bass Tackle "system" is they makes a clamp to hold the injectors together, and a bar that holds the piston rods in sync. Otherwise as long as your injectors have nozzles about 5/8" and have a squarish end they should fit into the blending block just fine. Here's a link to their Medium nozzle. Do you think it will work then? http://www.caneycreekmolds.com/Medium-Injector-Nozzle_p_90.html Quote Link to comment Share on other sites More sharing options...
Frank Posted March 6, 2013 Report Share Posted March 6, 2013 Here's a link to their Medium nozzle. Do you think it will work then? http://www.caneycreekmolds.com/Medium-Injector-Nozzle_p_90.html Yes it will. Will it be easy no. Doing it that way you must fill two injectors and fit them to the block then keep even pressure and inject. My advise would be to get the one for the Twinjector (the wider one) so when you buy the Twinjector later you will have a spare. Because it will not be as easy as it seems. Frank Quote Link to comment Share on other sites More sharing options...
Bassinjunkie88 Posted March 6, 2013 Author Report Share Posted March 6, 2013 Thanks for the advise guys...I went ahead and just purchased the 6 oz twinjector all-in-one unit from Bass tackle. WooHoo! They have free shipping now on all orders over 75 bucks, so I saved 21 bucks and got free shipping. Quote Link to comment Share on other sites More sharing options...
