stretcher66 Posted March 8, 2013 Report Share Posted March 8, 2013 Here might be a helpful link to the readers outside of the USA about what Future floor finish will be listed as on your stores shelves. That is if you get the bug to give it a go with your painting. http://www.swannysmodels.com/TheCompleteFuture.html Quote Link to comment Share on other sites More sharing options...
BobP Posted March 9, 2013 Report Share Posted March 9, 2013 I added Future to some bottles of paint per the recommendations and in a few random cases, it caused the paint pigment to fall out of suspension and form a hard layer in the bottom of the bottle. Had to throw those paints out. I don't remember with which brands and colors this happened. Also, if you use Future, you have to clean your airbrush, including the barrel, thoroughly after painting. Future dries hard and can be difficult to remove. I've had to use pliers to pull the needle out of my airbrush a couple of times when it became welded into the barrel packing. I liked using Future during painting but there can be downsides. Quote Link to comment Share on other sites More sharing options...