A-Mac Posted April 15, 2013 Report Share Posted April 15, 2013 What tools do you guys like to use for cleaning up the hook hangers/ line tie on your cranks after paint/clearcoat? I've been using a pointed diamond bit with my dremel, but I feel there is a better tool for the job. Quote Link to comment Share on other sites More sharing options...
quickdraw Posted April 15, 2013 Report Share Posted April 15, 2013 I just put the tip of one side of a small pair of needle nose pliers through the hole and twist. The extra clearcoat and paint pops right off. Quote Link to comment Share on other sites More sharing options...
Seeking 56 Posted April 15, 2013 Report Share Posted April 15, 2013 For screw eyes I start with a Dremel and ss brush and then use a hot iron with the razor blade attachment to clean out the hole. s54 Quote Link to comment Share on other sites More sharing options...
mark poulson Posted April 15, 2013 Report Share Posted April 15, 2013 I use an exacto knife and split ring pliers. Quote Link to comment Share on other sites More sharing options...
quickdraw Posted April 17, 2013 Report Share Posted April 17, 2013 I just finished the 4th coat of clear on some swimbaits with a hinge using 2 eyescrews. With 4 coats the screw eyes got filled in pretty good so I used Dremel with a very small size bit to get in and around the eyes and not cause any leaks. Quote Link to comment Share on other sites More sharing options...
bassguy Posted April 17, 2013 Report Share Posted April 17, 2013 I use the ss brush on my dremel and it clears the hole as well. Quote Link to comment Share on other sites More sharing options...
A-Mac Posted April 17, 2013 Author Report Share Posted April 17, 2013 Cool. Thanks guys. I wonder how rapala does it. Quote Link to comment Share on other sites More sharing options...
