Little man baits Posted April 19, 2013 Report Share Posted April 19, 2013 Ok so I put together a presto pot with a spout but the spout gets clogged and nothing coming out. Can anyone help. I tried posting a pic From my mobile phone but can't seem to get it to work. Thanks a lot guys Quote Link to comment Share on other sites More sharing options...
smallmouthaholic Posted April 19, 2013 Report Share Posted April 19, 2013 .Have your PP. on w/ hot plastisol and the stirrer operating Open the spout fully and heat the brass carefully w/ a torch.Have a container under the spout. It will start to drip and then -walla-walla the melted plastic comes out and you're ready to go. Quote Link to comment Share on other sites More sharing options...
Bass-Boys Posted April 19, 2013 Report Share Posted April 19, 2013 (edited) is the spout in the side or bottom of the pot ? it needs to be very close to the heating area of the bottom of the pot and the spout needs to be as short as poss. if its to long it will cool off at the end and clog. put a propane torch on the spout when your pot is heated up and see if it starts to pour if it does then the spout is not getting enough heat. I guess we were typing at the same time. Edited April 19, 2013 by Bass-Boys Quote Link to comment Share on other sites More sharing options...
Little man baits Posted April 19, 2013 Author Report Share Posted April 19, 2013 Thanks for the quick replies guys I will try this for sure just a side note what model presto do u guys use ? Quote Link to comment Share on other sites More sharing options...
Little man baits Posted April 19, 2013 Author Report Share Posted April 19, 2013 It's on the bottom. Quote Link to comment Share on other sites More sharing options...
Bass-Boys Posted April 20, 2013 Report Share Posted April 20, 2013 I have bears,, i have to heat it up real well @ 1st then it works great. before that i made my own and the spout clogs on it , but i put the spout on the side w/ an elbow and it will not stay warm enough. Quote Link to comment Share on other sites More sharing options...
