llPa1nll Posted May 21, 2013 Report Share Posted May 21, 2013 Hi all, I am looking for a screw lock keeper/hitchhiker for a larger saltwater hook. The hook diameter is 0.095", is there anything out there that I could possibly buy, or am I looking at making my own coil keeper? This is basically what Id like to get. It is just every incarnation I find that might work, they are too small to fit on the hook. If I were forced to make my own what type of wire and wire former and any other tools or items would I be needing to complete this. As always any help would be greatly appreciated. Thanks. Quote Link to comment Share on other sites More sharing options...
cadman Posted May 21, 2013 Report Share Posted May 21, 2013 As far as wire goes you will need to use stainless steel, for the corrosion resistance. As far as wire guage, that is up to you. The heavier the wire the hader it will be to bend and make loops. Do some trial and error on some different guages. Depending on what you are using it for, you can start with (.040) wire and go up or down to suit your needs. Below is a link, of a tutorial that might help you one of the members on this site made. It is for guys who like to make their own custom made screw-locks. http://www.tackleunderground.com/community/index.php?/topic/12037-making-consistent-screw-locks-rev-1-0/ Hope this helps Quote Link to comment Share on other sites More sharing options...
