Kasilofchrisn Posted June 16, 2013 Report Share Posted June 16, 2013 So I have some jigs that I want to add reflective tape to. One of them is the do-it flutter jig in 2oz through the 9oz versions. There are some others as well that are even bigger. My question is how do I seal the tape to the jig? I just don't trust the sticky back 100% . I am sure if the water doesn't remove it the fish will. Once an edge starts it is hard to save it from peeling. I have tried D2T and it works but not ideal and not what I really am looking for. Besides the jigs I make are BIG and that means a lot of D2T. I was thinking a rattle can clear might work? Has anyone tried this? This would be over the top of powder coat paint. I think I am going to try it and see how it does. If you have any other suggestions let me know. Quote Link to comment Share on other sites More sharing options...
BLT Posted June 18, 2013 Report Share Posted June 18, 2013 Smae thing I use to coat my threads, and the jig heads.....minwax polyurethane.I paint 2-3 coats on. Comes in a bluish, green can. Never seen it yellow, crack, or turn anything a different color. Use it to cover the eyes of my Ultra minnows. Quote Link to comment Share on other sites More sharing options...
