J lure Posted June 19, 2013 Report Share Posted June 19, 2013 I would like to learn how to design and create on some type of CAD software. What are your reccendations? Are there any legit at home learning programs? My plans are not to create molds but maybe one day print off 3d printers. Quote Link to comment Share on other sites More sharing options...
Baitjunkys Posted June 19, 2013 Report Share Posted June 19, 2013 I would like to learn how to design and create on some type of CAD software. What are your reccendations? Are there any legit at home learning programs? My plans are not to create molds but maybe one day print off 3d printers.Imo. Your best to start with a 2d cad program and learn the basics. They will come in handy later. There are a bunch of free 3d cad programs out there. But all will be limited in what you can do. Quote Link to comment Share on other sites More sharing options...
Vodkaman Posted June 19, 2013 Report Share Posted June 19, 2013 There should be manuals for the different systems, so that you can see what you're getting into. Be prepared to donate a lot of hours. Also, if you do a bit then don't use it for a few months, it will be like starting over. Dave Quote Link to comment Share on other sites More sharing options...
Vodkaman Posted July 2, 2013 Report Share Posted July 2, 2013 Top information and advice Bob. Dave Quote Link to comment Share on other sites More sharing options...
