Hokieangler Posted August 28, 2013 Report Share Posted August 28, 2013 Had a customer bring me a crankbait that had split top and bottom! I'm sorry to say it was mine! I painted him another tonight to replace it! Ony thing I can think of is that he had it in a very hot place and the air trapped inside expanded and split the bait! Any other thoughts? Quote Link to comment Share on other sites More sharing options...
RayburnGuy Posted August 28, 2013 Report Share Posted August 28, 2013 Did it split along the seams? If so it could be the result of a problem in the way it was welded together or the result of incomplete fusion. I've gotten several baits wayyyyyyyyyyy to hot with a heat gun when heat setting the paint before and they swelled up like a toad frog, but none of them actually split open. I'm thinking you just got a bad one. Ben 1 Quote Link to comment Share on other sites More sharing options...
Hokieangler Posted August 28, 2013 Author Report Share Posted August 28, 2013 Ben ,I sure hope so! It wa a little embarrassing ! Quote Link to comment Share on other sites More sharing options...
RayburnGuy Posted August 28, 2013 Report Share Posted August 28, 2013 I wouldn't be too "embarrassed" Hokie. It was something that was most likely out of your control and you did make good on it. You can't ask for more than that. Ben 1 Quote Link to comment Share on other sites More sharing options...
Hokieangler Posted August 28, 2013 Author Report Share Posted August 28, 2013 Thank you Ben! Chris Quote Link to comment Share on other sites More sharing options...
