dlaery Posted August 30, 2013 Report Share Posted August 30, 2013 I have been trying this with some Red powder and trying to brush it on some white powder painted jigs as a hi-lite and when I bake it, it turns out spotty, you can see the white in places, a lot of white. I don't bake the white before I put on the Red. If I air brush some Red, then I will have to clear coat to keep from scratching off. Has anyone had good results with the Powder Water as far as covering good when used with a brush? I bought some automotive Red that uses a catalyst and will try that if I can't get the powder to work. Quote Link to comment Share on other sites More sharing options...
andy1976 Posted August 31, 2013 Report Share Posted August 31, 2013 I just bought some high temp tape from columbia. I'm doing red and white. I would think it to be faster and cheaper to stay paint the red and use some of Columbia's superdurable wet as a top coat. Works for me. . Good luck. Quote Link to comment Share on other sites More sharing options...
