emptystringer81 Posted September 3, 2013 Report Share Posted September 3, 2013 I have done about 8 lures or so with the KBS clear coat and am having a problem with the baits getting small bubbles mostly on the bottom half, after second coat. I make sure to let lure dry after painting and dip, then do second dip after about 2 hours and there is small bubbles. Im not sure if it is the heat in my garage, its 95 degrees outside so probably 90 degrees in garage. I was just wondering if anyone else has had this problem. Quote Link to comment Share on other sites More sharing options...
EdL Posted September 3, 2013 Report Share Posted September 3, 2013 Did you check out KBS site for info on application? I read they call for first coat to be thinned 10% to seal when applied to wood. They list ideal temp range 50-82 deg F and moderate to dry conditions. This stuff looks like another possible clear coat but may be a bit tricky to apply. Quote Link to comment Share on other sites More sharing options...
