Little man baits Posted November 15, 2013 Report Share Posted November 15, 2013 Hey guys I know I am small scale but have been approached by a major chain to have product in their store. My question is I know u need the molds to produce volume but in your opinion what is the best system to achieve this ? Any support would be greatly appreciated. Steve LMB Quote Link to comment Share on other sites More sharing options...
biggun Posted November 15, 2013 Report Share Posted November 15, 2013 Probably would help to know what kind of volume you are wanting to make per run, per day. 10 pkgs 100 pkgs 1,000 pkgs 10,000 pkgs Quote Link to comment Share on other sites More sharing options...
Little man baits Posted November 15, 2013 Author Report Share Posted November 15, 2013 So lets just say about 500 pkgs a day. Quote Link to comment Share on other sites More sharing options...
carolinamike Posted November 16, 2013 Report Share Posted November 16, 2013 (edited) Little man, how many pieces are you talking? 500 packs with 10 per pack of course is 5000 pieces, which is around a half days run for most baits. Almost all of your large injectors require a full days run. Also, let me advise you about large chain stores, some have a fining system, where they actually fine you for not delivering product on time, for not sending invoices on time, and other stipulations. Also, you will need a production mold, which could run you from $4000-$10,000 according to the size of the bait and whether or not you need solid colors, laminate, or two color(body one color, tail different color). These are all variables to take into consideration. So I would suggest that a valid contract is a must. Also, some companies require half the money up front to start production, and some ask for all the money up front to get started. This just shows them that you're willing to make the commitment and to build a trusting customer relationship. It's not that they don't trust you, it's just standard practice in this business. I know for sure, that you will have to pay half for the production mold up front, before they will start making your mold. If I can be of service, you're more than welcome to PM me. Mike Also, I'm sending you a PM about someone who does large volume production in Canada. Edited November 16, 2013 by carolinamike Quote Link to comment Share on other sites More sharing options...
big will's customs Posted November 17, 2013 Report Share Posted November 17, 2013 little man hope this turns out good for your company all the luck in the world.... but mike is right you need to check every detail out of how the store chain conducts there business.... ands every penny can turn into dollars very quickly if you under charge for your baits or in fines.. mike would be the man that could steer you in the right direction .... good luck and god bless Quote Link to comment Share on other sites More sharing options...
Little man baits Posted November 17, 2013 Author Report Share Posted November 17, 2013 Hey guys. U really just want to say a big thank u to everyone who has chimed in on my topic. It's been very informative. As of right now the talks have passed through management and now have to go to corporate. And this whole ordeal is to display new and upcoming products in their store. And to see what kind of consumer reaction they will get with my product. So more or less a trial for now. I will not reveal the chain store at this time just because. Again thank u all again you all make very very good points regarding production and costs etc..... All to take into consideration. LMB Quote Link to comment Share on other sites More sharing options...
