ING Posted December 26, 2013 Report Share Posted December 26, 2013 What is better for making jig casting mold: Ulracal 30 or 60, plain gypsum, silicon rubber etc...? Thanks Quote Link to comment Share on other sites More sharing options...
andy1976 Posted December 26, 2013 Report Share Posted December 26, 2013 (edited) Red high temp silicone is the best silicone wise. If you're trying to make jigs bondo is pretty good. You can mix a little fiberglass resin to make it easier to work with. I did a ten oz butterfly jig a few years ago. Poured a few hundred jigs with one and then moved on to aluminum cnc because I wanted to sell. Cost about a dollar per mold using bondo and you can get a lot of pours out of one mold. Its a good idea if you haven't made two piece molds to get on YouTube. Tap plastics and smoothon silicone have some good tutorials. Edited December 26, 2013 by andy1976 Quote Link to comment Share on other sites More sharing options...
ING Posted December 27, 2013 Author Report Share Posted December 27, 2013 Thank you, Andy! What do you think about next method: Mold made from gypsum. There are no comments but everything clear from video. Quote Link to comment Share on other sites More sharing options...
BlueCHip Posted January 4, 2014 Report Share Posted January 4, 2014 Try mold max 60 Quote Link to comment Share on other sites More sharing options...
andy1976 Posted January 4, 2014 Report Share Posted January 4, 2014 What size lure and what are you trying to mold. Quote Link to comment Share on other sites More sharing options...
ING Posted January 5, 2014 Author Report Share Posted January 5, 2014 I'll try bucktail heads form 1/2 to 2oz and bodies for inline spinners from 1/2 to 1oz Thanks everybody for response! Quote Link to comment Share on other sites More sharing options...
