Money Baits Posted February 13, 2014 Report Share Posted February 13, 2014 I have been using devcon 2 ton for about a year and it has worked fine. I was using the one in the tube, but the other day i bought the package with two separate bottles because it was a better deal. When i tried to mix it up for about a minute it produced tons of bubbles and had a milky color to it. It also was raining outside, does that have anything to do with my problems? Quote Link to comment Share on other sites More sharing options...
Jaw Posted February 13, 2014 Report Share Posted February 13, 2014 I have this issue when my epoxy is to cold or it's to humid sometimes you can release some of the bubbles with a micro torch just brushing the bait for short periods I think the co released from the flame is what takes the bubbles out I have this issue when my epoxy is to cold or it's to humid sometimes you can release some of the bubbles with a micro torch just brushing the bait for short periods I think the co released from the flame is what takes the bubbles out Quote Link to comment Share on other sites More sharing options...
nedyarb Posted February 14, 2014 Report Share Posted February 14, 2014 Use a hair dryer on your lure to remove any bubbles! Quote Link to comment Share on other sites More sharing options...
stretcher66 Posted February 14, 2014 Report Share Posted February 14, 2014 Add a few drops of denatured alcohol when mixing the epoxy Quote Link to comment Share on other sites More sharing options...
mark poulson Posted February 14, 2014 Report Share Posted February 14, 2014 Add the alcohol after the epoxy is mixed, or it will bond to one part and keep it from mixing completely. Quote Link to comment Share on other sites More sharing options...
BobP Posted February 14, 2014 Report Share Posted February 14, 2014 I can't see why buying Devcon 2T in bottles would be any different from D2T in a syringe. It should be exactly the same stuff. Quote Link to comment Share on other sites More sharing options...
