Small Water Pro Posted February 14, 2014 Report Share Posted February 14, 2014 Years ago I fished worms that had little holes in them that trapped air in them as they were cast and they were killers. Cant find any like that now. Does anyone know how I could make my worms with holes in them? How could I make a mold to do these? Any help would be great? Quote Link to comment Share on other sites More sharing options...
SlowFISH Posted February 14, 2014 Report Share Posted February 14, 2014 I bought a brand that has the holes. Basically it looks like you could take a mold (for example an injection worm mold). Drill a line of 1/16" holes along the main axis up the body, then place dowel pins in those hole that protrude into the cavity, but leave a little room above for plastic to cover them when injected. Inject and pull the worm out. I was going to make a mold like this but for the most part just pouring baits without salt and using a lighter hook when necessary works for me. J. Quote Link to comment Share on other sites More sharing options...
