VanderLaan Posted February 26, 2014 Report Share Posted February 26, 2014 Got a few blanks with what I assume are mold marks. Best way to get rid of them? Small grit sandpaper? Steel wool? Quote Link to comment Share on other sites More sharing options...
joetheplumber Posted February 26, 2014 Report Share Posted February 26, 2014 I use scotch brite pads and sometimes wet sand with very fine sandpaper. Be careful and avoid getting water inside the blank when wet sanding. Some have small holes around the hook hangers that can leak. On a one knocker I've had a couple of the weights get stuck from this happening. I always seal around the hangers first now with super glue just to be sure. Quote Link to comment Share on other sites More sharing options...
bassguy Posted February 28, 2014 Report Share Posted February 28, 2014 Since you're going to paint them anyway. Just take some 100 grit sandpaper and go to it. Just take the ridge down flush and rough up the rest of the bait for the paint to bite. Jerry Quote Link to comment Share on other sites More sharing options...
