whalernut Posted February 28, 2014 Report Share Posted February 28, 2014 I currently make my own floating jigs from polystyrene. I currently use a water based paint to coat them. once painted I use a 2 part epoxy to coat them for a hardner. anyone have a better idea? would using a hardner then painting leave them with a better finish? any ideas are welcome. the spring walleye run will soon be upon us! Quote Link to comment Share on other sites More sharing options...
mark poulson Posted February 28, 2014 Report Share Posted February 28, 2014 The biggest issue would be what solvent is in the top coat. Check with the manuf. of the foam to see what solvents play nice with your foam. Quote Link to comment Share on other sites More sharing options...
ROWINGADUBAY Posted March 2, 2014 Report Share Posted March 2, 2014 I believe the seal coat jig finish will work if not some of the hard bait guys are using a concrete sealer as a clear coat with good results. Quote Link to comment Share on other sites More sharing options...
