smallmouthaholic Posted March 7, 2014 Report Share Posted March 7, 2014 Here's a link to the new Shooting Star System- http://retail.ultramolds.com/product/shooting-star-with-inector/?added-to-cart=17 Quote Link to comment Share on other sites More sharing options...
School Master Posted March 7, 2014 Report Share Posted March 7, 2014 I want one......bad Quote Link to comment Share on other sites More sharing options...
Frank Posted March 7, 2014 Report Share Posted March 7, 2014 Very nice looking system. Finally someone was smart enough to put a vented lid on. And no kitchen products. I am impressed. Quote Link to comment Share on other sites More sharing options...
fishon-son Posted March 8, 2014 Report Share Posted March 8, 2014 is this the bears system.. 1 Quote Link to comment Share on other sites More sharing options...
gone2long Posted March 8, 2014 Report Share Posted March 8, 2014 No it's Chris Archer. Quote Link to comment Share on other sites More sharing options...
DaveMc1 Posted March 8, 2014 Report Share Posted March 8, 2014 it is made by the same guy that makes Bear's Injector/heating block/temp controller. I am waiting to see what has been changed and if certain issues have been dealt with or not. Quote Link to comment Share on other sites More sharing options...
smallmouthaholic Posted March 8, 2014 Author Report Share Posted March 8, 2014 (edited) 1- the injector rests in a heated block 2- You remove the injector from the heated block and either- a-plug into the Left coupler,rotate and draw 1 color b- plug into the right coupler,rotate to draw a different color c- plug into the middle coupler,rotate and draw both colors simultaneously for 2 color injecting 3- the heated block does not rotate causing the heater and thermo coupler wires to prematurely break. (this was a problem w/ the original shooting star system)That problem can be minimize in your old system by using shrink tubing for the 1st 6-8'' of both the thermocouple and heater wires 4- the s.s. pots have indvidual heat controllers 5- the pots have lids w/ ventilation tubing which prevent plastisol smoke from escape requiring good exhaust. 6- each pot have mechanical stirrers w/ ports to add additional plastisol Edited for additional content Edited March 8, 2014 by smallmouthaholic Quote Link to comment Share on other sites More sharing options...
LIARS CORNER Posted March 9, 2014 Report Share Posted March 9, 2014 The new machine looks good Thanks for the run down on it I was wondering how it was going to work I like the vented pots and the 1 ..... 2 ..... or both color option it will make shoot in some baits easier I would like to see a video on it It looks good It should be a great machine they definatly started with a rock solid foundation ( the shooting star) Quote Link to comment Share on other sites More sharing options...
Basseducer Posted March 9, 2014 Report Share Posted March 9, 2014 smallmouthaholic, The link you posted isn't working for me. Is there another way I can look at ir? Quote Link to comment Share on other sites More sharing options...
gone2long Posted March 9, 2014 Report Share Posted March 9, 2014 smallmouthaholic, The link you posted isn't working for me. Is there another way I can look at ir? Google ultramolds that's the site its on. Quote Link to comment Share on other sites More sharing options...
smallmouthaholic Posted March 9, 2014 Author Report Share Posted March 9, 2014 Google ultramolds that's the site its on. Try this- http://retail.ultramolds.com/shop/ Quote Link to comment Share on other sites More sharing options...
Painter1 Posted March 10, 2014 Report Share Posted March 10, 2014 It looks like a great improvement of an already groundbreaking system. Quote Link to comment Share on other sites More sharing options...
archery1 Posted March 10, 2014 Report Share Posted March 10, 2014 wow!!!!!!!!!!! i want 1 !!!!!!!!! Quote Link to comment Share on other sites More sharing options...
