Mick Posted July 1, 2004 Report Share Posted July 1, 2004 I noticed a couple of posts where guys have made their own fluid beds and I would be interested to know how they did it. They dont make small jig size fluid beds down here in Australia and I cant find one over your side of the planet that is available in 220/240 volt. So I though it would be easier to make one. Any tips would be appreciated. Thanks Mick Quote Link to comment Share on other sites More sharing options...
dlaery Posted July 1, 2004 Report Share Posted July 1, 2004 Hey Mick, In my opinion, all you need is the porous board for the bottom of the box and an air chamber under the porous board. Mine has a vibratory motor but I almost never use the vibratory motor, just air. David Quote Link to comment Share on other sites More sharing options...
Coley Posted July 3, 2004 Report Share Posted July 3, 2004 Do a search on this site. I believe I read somewhere how to make one using an aquarium pump, a coffee can and the screen from a faucet filter. I know its here somewhere. Coley Quote Link to comment Share on other sites More sharing options...
