shurset1 Posted March 30, 2014 Report Share Posted March 30, 2014 How many of you are spin-casting your jigs,spinner baits, etc,.... do the jigs come out cleaner or do you need to still clean them up. for those of you that have could you please give some pros and cons. I am about ready to confirm a deal just would like some input.Thanks Quote Link to comment Share on other sites More sharing options...
dlaery Posted March 30, 2014 Report Share Posted March 30, 2014 are you buying a new or used? Quote Link to comment Share on other sites More sharing options...
shurset1 Posted March 30, 2014 Author Report Share Posted March 30, 2014 New, PLUS they offer training, I have a mold maker Quote Link to comment Share on other sites More sharing options...
dlaery Posted March 30, 2014 Report Share Posted March 30, 2014 Yes, they come out a lot cleaner. Your models for making the molds need to be perfect. If they have parting lines or imperfections when the mold is made, it will copy them perfectly. The molds don't last forever. As they wear out, they will develop parting lines. As far as clean up, normally they don't need any clean up. When a mold starts needing clean up, I make a new mold. Quote Link to comment Share on other sites More sharing options...
gonfishn Posted March 30, 2014 Report Share Posted March 30, 2014 Make sure you learn everything there is to know about porting and venting, the key to all good rubber molds is proper cutting of the vents and flow channels. Quote Link to comment Share on other sites More sharing options...
