Jaw Posted April 10, 2014 Report Share Posted April 10, 2014 I have a sebile dc crank that has had a reaction with somthing it touched so I was going to sand and repaint it but the plastic has softend does anyone know how to nuetralize this Quote Link to comment Share on other sites More sharing options...
Kustom Krankz Posted April 10, 2014 Report Share Posted April 10, 2014 is the plastic staying soft? if that's the case im not sure u can fix that- u may try coating it in epoxy then scuff it up and repaint it- just an idea- Quote Link to comment Share on other sites More sharing options...
Jaw Posted April 10, 2014 Author Report Share Posted April 10, 2014 Yes even after I cleaned all the soft plastic off and cleaned it with da it seems to get soft again I cleaned it up real good last night and will check it later tday but if it's soft again I think it's trash it has the hinged bottom hook so it don't believe epoxy will be an option but maybe thanks for your thoughts Quote Link to comment Share on other sites More sharing options...
Kustom Krankz Posted April 10, 2014 Report Share Posted April 10, 2014 yeah- im with you- once it gets soft like that I pretty much trash them- sounds like you got some acetone or something like that on it- I use those messed up baits to try out different color schemes on- basically a practice bait-I spilled some acetone and it ran over on some 1.5's one day and did the same thing- I let them dry a couple of days ,coated in epoxy and now I have 8-10 practice baits- some of them have 20 layers of paint on them I would imagine- just keep spraying them white and starting over- mike <::>< Quote Link to comment Share on other sites More sharing options...
