ravenlures Posted April 22, 2014 Report Share Posted April 22, 2014 When I turn a piece of wood on my lathe I used to have two pieces of sandpaper one 80 grit and a120 grit always sand with one and then pick up the 120 for finish, now maybe this was brought up somewhere before but I take a full sheet of sandpaper and spray adhesive the sides of both the 80 and 120 and stick together and then cut into strips, 80 grit on one side and 120 on the other just flip and sand. Works great, plus it makes it thicker and stronger, do any grit you want. Wayne Quote Link to comment Share on other sites More sharing options...
RayburnGuy Posted April 22, 2014 Report Share Posted April 22, 2014 Good idea Wayne. Thanks for sharing. Ben Quote Link to comment Share on other sites More sharing options...
mark poulson Posted April 23, 2014 Report Share Posted April 23, 2014 Old belt sander belts work great, too. Quote Link to comment Share on other sites More sharing options...
