Isaiah JV Posted April 29, 2014 Report Share Posted April 29, 2014 Ok, stupid question but I would like to know how to make a mold of a soft plastic lure that doesn't exsist ? Quote Link to comment Share on other sites More sharing options...
saltwater Posted April 29, 2014 Report Share Posted April 29, 2014 As Bob La Londe said make/carve a master and form a 2 or 3 part mold of it. I make my molds from fiberglass, they last longer than silicon or plaster of Paris but less than aluminum. 1 Quote Link to comment Share on other sites More sharing options...
rcbv Posted April 29, 2014 Report Share Posted April 29, 2014 Your post comes at a perfect time. I'm setting up to cut prototype aluminum molds. I've already done an open pour mold for one member for free while I worked through the process. I need to do the same thing for a two part mold and I'll offer you the same deal, I do all the CAD/CAM and will machine a two part mold for you as a freebie while I work all the kinks out of the process. This is in preparation for setting up a low cost custom mold prototyping service. One low price will include all the CAD/CAM and a one cavity mold. If you're interested go ahead and message me. 1 Quote Link to comment Share on other sites More sharing options...
texacan84 Posted May 1, 2014 Report Share Posted May 1, 2014 Isaiah. When you get what you want and need a mold made, you need to get a hold of rcbv. He just did an aluminum open pour for me on some baits I created and it was FRIGGING AWESOME. You will be pleased at his work. I can't thank him enough. 1 Quote Link to comment Share on other sites More sharing options...
Mudd Butt Baits Posted January 6, 2015 Report Share Posted January 6, 2015 did you ever get that mold made? Quote Link to comment Share on other sites More sharing options...
