brock3798 Posted May 21, 2014 Report Share Posted May 21, 2014 Hey guys I was just wondering if I could get a weed guard like this or how you would make it into the jig thanks guys ! Quote Link to comment Share on other sites More sharing options...
cadman Posted May 21, 2014 Report Share Posted May 21, 2014 I use, a 3" piece of coated seven strand, fold it in half and stick it in the weedguard hole and glue it in with epoxy. You can also use heavy monofilament or fluro-carbon line. That will do the same trick. Quote Link to comment Share on other sites More sharing options...
toadfrog Posted May 21, 2014 Report Share Posted May 21, 2014 The bristles from an old hair brush work great for small jigs . You can pull the whole clump with a pair of needle nose pliers . They have a good fit as well . Quote Link to comment Share on other sites More sharing options...
JSC Posted May 21, 2014 Report Share Posted May 21, 2014 Cadman Glues them in and works good -- but I perfer to mold them in. Attached shows using a leader sleeve to "fill" the hole. Rubber "Collars" and electric wire insulation will all work. Quote Link to comment Share on other sites More sharing options...
