nedyarb Posted May 27, 2014 Report Share Posted May 27, 2014 Does anybody else own this mold? Here's the story, I bought 30 birch bug lures off ebay to try and see if I liked them. Well I did so I bought a two cavity mold from do it (caney creek). I can not get the mold to stop flashing on the ribs. It's honestly not a huge issue, I don't think the fish would even see it. But I don't like the look, and the ones from eBay did not have it. I have to say, I contacted do it, I talked to Ryan and he went out of his way to help me. He even sent me another mold at no charge. Which was great customer service, however it still does it! I am using bears medium plastic, and a presto pot set at 300. Slow pressure. Here's a couple pics. Please advise if you have any suggestions. Rob Quote Link to comment Share on other sites More sharing options...
nedyarb Posted May 27, 2014 Author Report Share Posted May 27, 2014 Here's another pic....it's on the bottom right ribs Quote Link to comment Share on other sites More sharing options...
Apdriver Posted May 27, 2014 Report Share Posted May 27, 2014 Have you tried moving your clams around? I'd use a couple C clamps on it and experiment with placement and clamp pressure. Quote Link to comment Share on other sites More sharing options...
nedyarb Posted May 27, 2014 Author Report Share Posted May 27, 2014 Thanks I've been using the cobalt rubber clamps. I will try the heavier duty c clamps Quote Link to comment Share on other sites More sharing options...
toadfrog Posted May 28, 2014 Report Share Posted May 28, 2014 C clamps or gang them together in a horizontal piston clamp . Will need spacers between the molds to keep from interfering with the injector. Quote Link to comment Share on other sites More sharing options...
