mark poulson Posted June 25, 2014 Report Share Posted June 25, 2014 This is an interesting one: http://s1294.photobucket.com/user/Stephen_Ashcraft/media/fixedblade_zps2d40fa2c.jpg.html It feeds the blank through the square tube. The saw does not rock. The blank spins and bounces to make the bait. That must be an interesting machine. Too bad there aren't more photos. Quote Link to comment Share on other sites More sharing options...
socal cranker Posted June 25, 2014 Report Share Posted June 25, 2014 "http://s1294.photobu...40fa2c.jpg.html" Jawjacker"s machine? Quote Link to comment Share on other sites More sharing options...
robalo01 Posted June 28, 2014 Report Share Posted June 28, 2014 I am looking into making a crankbait duplicator that cuts baits from foam board with a hot wire (or rod, blade etc). I tested with a make-shift hot wire cutter and it very well, albeit a little slow. Any ideas of what to use for a cutting heated object? I have seen hot wire cutters made with 110V. You run a 100W light bulb in the circuit. I wonder if it would allow me to use a thicker wire and cut faster? Quote Link to comment Share on other sites More sharing options...
mark poulson Posted June 28, 2014 Report Share Posted June 28, 2014 Please be careful! Quote Link to comment Share on other sites More sharing options...
jawjacker Posted July 1, 2014 Report Share Posted July 1, 2014 Socal is right..........Jawjackers machine........that's a j1 body being cut........ Quote Link to comment Share on other sites More sharing options...
Trout Tramp Posted July 4, 2014 Report Share Posted July 4, 2014 Went for a drive the other day up to see Flash and got to check out his lure duplicator( absolutely brilliant ) After a quick chat and demo of how to work the machine he turned around and said well there is the timber there is the machine You can have a crack at making your self some lure blanks if you would like (Awesome)he then left me to it while he went about doing some work for a neighbour I couldn't believe it Thanks Flash your a true gentleman Cheers Trout tramp Quote Link to comment Share on other sites More sharing options...
FLASH Posted July 4, 2014 Report Share Posted July 4, 2014 (edited) Allways willing to help out fellow lure carvers . Glad you had a great few hours mate . Will see you soon. FLASH. Edited July 4, 2014 by FLASH Quote Link to comment Share on other sites More sharing options...
