curtisb Posted July 28, 2014 Report Share Posted July 28, 2014 For jigs with place for eye molded in how do you glue them on? Do I need to put a coat of clear on them after putting eye on them? Thanks For Your Help! Curtis B f Quote Link to comment Share on other sites More sharing options...
cadman Posted July 28, 2014 Report Share Posted July 28, 2014 I use WTP eyes, as they are the only ones I have found that actually stick once put on. How I do it, is like this. Wipe jig down with rubbing alcohol, this will get all of your oils from your fingers off of the jig. Put on some latex gloves, and stick your jig eyes onto the jig. Press firmly with your fingers. Do all of your jigs, then mix equal amounts of D2T(Devcon 2 Ton), and brush on the entire jig including the eyes. Let dry 24 hours. Then go fish. 2 Quote Link to comment Share on other sites More sharing options...
LedHed Posted July 29, 2014 Report Share Posted July 29, 2014 Mostly do ultra lite & lite jigs now so I use a couple coats of clear fingernail polish to coat 3D eyes. Quote Link to comment Share on other sites More sharing options...
Jig Man Posted July 29, 2014 Report Share Posted July 29, 2014 I use the cheap eyes because I bought a bunch not knowing what I was getting. I use Krazy glue with a brush in it to wet the socket, place the eye, let it dry, cover with clear nail polish. Quote Link to comment Share on other sites More sharing options...
