joelhains Posted August 17, 2014 Report Share Posted August 17, 2014 I have the Bass Tackle Twinjector but I can't seem to be able to get a good 50/50 laminate with my swimbaits. I've watch some of the YouTube videos but I can't figure out what I'm doing wrong. Any suggestions or tips on how to get this yo work? Thanks! Quote Link to comment Share on other sites More sharing options...
archery1 Posted August 17, 2014 Report Share Posted August 17, 2014 temps of both colors the same? Quote Link to comment Share on other sites More sharing options...
joelhains Posted August 17, 2014 Author Report Share Posted August 17, 2014 (edited) I warm each color in the microwave separately. So they are probably slightly different. The consistency appears to be the same. Edited August 17, 2014 by joelhains Quote Link to comment Share on other sites More sharing options...
DaveMc1 Posted August 17, 2014 Report Share Posted August 17, 2014 you need to check the temps on them with a thermometer to ensure they are the same, as if they are different they will not laminate properly Quote Link to comment Share on other sites More sharing options...
MonteSS Posted August 17, 2014 Report Share Posted August 17, 2014 As said temps the same. Also suck up same amount of plastic in each side. This simple jig helps suck up evenly. Quote Link to comment Share on other sites More sharing options...
mark poulson Posted August 17, 2014 Report Share Posted August 17, 2014 That's a smart idea. Simple and effective. Quote Link to comment Share on other sites More sharing options...
gone2long Posted August 17, 2014 Report Share Posted August 17, 2014 Some guys will also tweak or loosen the cross bar on the plungers to allow the injectors to move more freely as some times they are racked. Does your setup feel a little tight this may help to get an even flow if you will. Quote Link to comment Share on other sites More sharing options...
