bassmaster0726 Posted September 26, 2014 Report Share Posted September 26, 2014 Im looking for a Twinjector if anybody has one to sell or knows who makes them. I know of Basstackles but its a little pricey. Does anyone know of a cheaper one? Quote Link to comment Share on other sites More sharing options...
SlowFISH Posted September 26, 2014 Report Share Posted September 26, 2014 Not sure there are any cheaper... if you have 2 injectors already - I believe you can buy just the blending block and clamp which will save you a little cash. J. Quote Link to comment Share on other sites More sharing options...
MonteSS Posted September 26, 2014 Report Share Posted September 26, 2014 http://www.shopbaitjunkys.com/Pro-Lam-Laminate-Injector-4-ounce_p_271.html Quote Link to comment Share on other sites More sharing options...
edgecrusher Posted September 28, 2014 Report Share Posted September 28, 2014 Watch all the soft plastic forums, sometimes a bargin can be had if you don't mind used. I picked up the Baitjunkys twin set for $120. Quote Link to comment Share on other sites More sharing options...
gone2long Posted October 6, 2014 Report Share Posted October 6, 2014 Sounds like someone over on bear's site may have what your looking for. Quote Link to comment Share on other sites More sharing options...
Bassinfool Posted October 6, 2014 Report Share Posted October 6, 2014 I had two injectors already and picked up the small blending block from bear's site. It works well enough, don't really make a whole lot of laminate baits so spending the extra cash for the BT or BJ twinjector wasn't justified for me. Quote Link to comment Share on other sites More sharing options...
coldogfishing Posted October 7, 2014 Report Share Posted October 7, 2014 Ultra molds Also has twin injectors that are nicely priced Quote Link to comment Share on other sites More sharing options...
DaveMc1 Posted October 7, 2014 Report Share Posted October 7, 2014 Ultra molds Also has twin injectors that are nicely priced these twin injectors are made specifically for their Shooting Star system, you will not be able to shoot laminates if you buy the injector by itself. Quote Link to comment Share on other sites More sharing options...
coldogfishing Posted October 7, 2014 Report Share Posted October 7, 2014 You are correct sir. Sorry I didn't notice that when I looked at them the other day. Quote Link to comment Share on other sites More sharing options...
mark poulson Posted October 9, 2014 Report Share Posted October 9, 2014 (edited) Just a side bar. If you already have two similar injectors, you can join them with a couple of blocks of wood, notched for the injector bodies, and joined by a through bolt. You can even make a wooden handle for the setup, if you like. It won't be as elegant as Baitjunky's, but it will work. You will still need the blending block. Edited October 9, 2014 by mark poulson Quote Link to comment Share on other sites More sharing options...
