MidwestFishingShow Posted October 20, 2014 Report Share Posted October 20, 2014 Do injectors all have a stock size tip or does it vary what you need depending on the brand of mold? Most the injectors I have been researching don't say the size of the injector tip so I was just wondering if they sell different tip sizes or they're all the same. Any suggestions to a good starter injector would also be appreciated. 3oz+ size. Thanks MWFS. Sorry in advance if this question is frequently asked. Quote Link to comment Share on other sites More sharing options...
Frank Posted October 20, 2014 Report Share Posted October 20, 2014 The standard is 5/8" and most have them that size. You will find many injectors for sale with a few different ideas. The most important one to me is one with a tip that locks on.Some have thin walled tubing and then others may have thick walls. Not sure that it makes a big difference I have both and don't see a big difference other than the thinner walled ones gets hot fast. Kinda makes it uncomfortable to hold on to. But a good pair of glove would be needed. I use thinner ones that fit my hands better. I use mostly Basstackle injectors and if you plan on doing laminates they have a great two color system that can be taken apart and used as singles. This will save you money in the long run. Free shipping is not bad either. Quote Link to comment Share on other sites More sharing options...
