macstackleman Posted November 16, 2015 Report Share Posted November 16, 2015 Tip to keep paint out of eye! Cut 1/8" shrink tubing about 3/16 to 1/4 inch long. Slip over eye before heating to paint. When heating to paint tubing grabs onto eye. Before curing just peel off tubing and ready to cure!! 1 Quote Link to comment Share on other sites More sharing options...
plbass Posted January 31, 2016 Report Share Posted January 31, 2016 Whats the reasoning for bending the blade? Quote Link to comment Share on other sites More sharing options...
VersatileFuturian Posted February 1, 2016 Report Share Posted February 1, 2016 The more you bend the blade, the more control you have over the bait. I like to find a happy medium. Where it runs relatively straight on a steady retrieve but when I pop it or speed my retrieve up, it jerks to the side. Quote Link to comment Share on other sites More sharing options...
mark poulson Posted February 1, 2016 Report Share Posted February 1, 2016 (edited) You can retrieve a bent blade faster without it rising. Some blades come with two holes in the outer edges, and these seem to allow a slightly faster retrieve without the bait rising, but I bend them anyway. Edited February 1, 2016 by mark poulson Quote Link to comment Share on other sites More sharing options...
Apdriver Posted February 2, 2016 Report Share Posted February 2, 2016 I just get more consistent vibration with the blade bent. I can retrieve it slower with good vibration, in other words. Just slow rolling that puppy along the bottom or right over the top of riprap just touching the tops of the rock every once in a while. Dynamite! Hang on! 1 Quote Link to comment Share on other sites More sharing options...
Dink Mendez Posted March 12, 2016 Report Share Posted March 12, 2016 Poison Tail Jig ! I would like to Thank Dink Master for helping out on the bladed swim jig I just got done with the jigs. Thanks very much! Quote Link to comment Share on other sites More sharing options...
Dink Mendez Posted March 12, 2016 Report Share Posted March 12, 2016 Better Pictures Quote Link to comment Share on other sites More sharing options...
Dink Mendez Posted March 12, 2016 Report Share Posted March 12, 2016 Thanks again Dink Master for the help and supply to achieve what I wanted to build! Quote Link to comment Share on other sites More sharing options...
Dink Mendez Posted March 12, 2016 Report Share Posted March 12, 2016 Do it ultra minnow spinnerbait head for a Bladed jig Quote Link to comment Share on other sites More sharing options...
Dink Master Posted March 12, 2016 Report Share Posted March 12, 2016 Great job. Nice Bluegill. Quote Link to comment Share on other sites More sharing options...
