RAWJigs Posted October 30, 2014 Report Share Posted October 30, 2014 Does anyone pour the 706 Craw? So sorry for asking these questions, just getting samples to make sure I get the craw we wanna make. Thanks guys. Will pay for shipping and baits! The 2 that has sent baits so far I greatly appreciate it! Quote Link to comment Share on other sites More sharing options...
MonteSS Posted October 31, 2014 Report Share Posted October 31, 2014 706 is VERY new. I would guess no one has it yet. Did you contact Bob about a sample or ask if he could recomend someone he sold a mold to? Ask him if it does not infringe on the Rage patent also Quote Link to comment Share on other sites More sharing options...
nedyarb Posted November 6, 2014 Report Share Posted November 6, 2014 I bought the 706....pm me if you want samples 1 Quote Link to comment Share on other sites More sharing options...
MonteSS Posted November 7, 2014 Report Share Posted November 7, 2014 Nice. Has anyone asked him if he researched legality of the baits because of the Rage patent? Quote Link to comment Share on other sites More sharing options...
RAWJigs Posted November 8, 2014 Author Report Share Posted November 8, 2014 That is what we need to find out, i called him and emailed him last week with no response to ask for samples and about the legal issues Quote Link to comment Share on other sites More sharing options...
mark poulson Posted November 9, 2014 Report Share Posted November 9, 2014 (edited) I would guess that responding to legal questions might leave him open to legal issues, because he acknowledges that he is aware that there are legal issues. If you only pour for yourself, you can easily make a two piece P.O.P. mould that works fine, if you use an injector to pour it. A hand pour is difficult with all the fine detail. Edited November 9, 2014 by mark poulson Quote Link to comment Share on other sites More sharing options...
RAWJigs Posted November 16, 2014 Author Report Share Posted November 16, 2014 Got the 706 craw samples from nedyarb, these craws have some AWESOME action. Quote Link to comment Share on other sites More sharing options...
MonteSS Posted November 16, 2014 Report Share Posted November 16, 2014 Ya I ordered a four cavity during the sale. Didnt get yet Quote Link to comment Share on other sites More sharing options...
RAWJigs Posted November 16, 2014 Author Report Share Posted November 16, 2014 Awesome action monte Quote Link to comment Share on other sites More sharing options...
army-boot Posted November 18, 2014 Report Share Posted November 18, 2014 I also ordered one. Hopefully it arrives this week. I should just drive by and see since hes only a couple miles from my house Quote Link to comment Share on other sites More sharing options...
archery1 Posted November 18, 2014 Report Share Posted November 18, 2014 I also ordered one. Hopefully it arrives this week. I should just drive by and see since hes only a couple miles from my house Man....LUCKY U !!!!!!!!!!!!! Quote Link to comment Share on other sites More sharing options...
MonteSS Posted November 18, 2014 Report Share Posted November 18, 2014 Mine said it shipped today Quote Link to comment Share on other sites More sharing options...
MonteSS Posted November 20, 2014 Report Share Posted November 20, 2014 (edited) Got the mold today. Warmed it in the toaster oven and shot a few. Shoots great. I can tell they will have rediculous action. However, the hook slot is just plain stupid. Especially since they will usually be used as a jig trailer. I tore off two segments (as usual) to shorten it a bit. With the large slot right there half the diameter is missing to thread on the hook. I guess for texas rigging it would be OK, but even then I prefer to skin hook as usual. Think I will get the dremel out and grind slot away Edited November 20, 2014 by MonteSS Quote Link to comment Share on other sites More sharing options...
RAWJigs Posted November 20, 2014 Author Report Share Posted November 20, 2014 Yeah I noticed that about the hook slot. Didn't care for it myself. But I put the whole craw on the jig, but it worked just fine...the action is awesome! Quote Link to comment Share on other sites More sharing options...
MonteSS Posted November 20, 2014 Report Share Posted November 20, 2014 (edited) I emailed and he said he could make without slot. Too late now. I will dremel off slot for three front segments. The back half of slot is nice for texas or rage rig Edited November 20, 2014 by MonteSS Quote Link to comment Share on other sites More sharing options...
RAWJigs Posted November 21, 2014 Author Report Share Posted November 21, 2014 So do we think this is infringing on the strike king copyright Quote Link to comment Share on other sites More sharing options...
MonteSS Posted November 21, 2014 Report Share Posted November 21, 2014 I dont sell so dont care Quote Link to comment Share on other sites More sharing options...
army-boot Posted November 21, 2014 Report Share Posted November 21, 2014 So do we think this is infringing on the strike king copyright Good question, thats why I just went ahead and bought one. Arrived today but I haven't had a chance to shoot any yet. Not sure how I feel about the hook slot, I'll have to do some testing. Quote Link to comment Share on other sites More sharing options...
MonteSS Posted November 21, 2014 Report Share Posted November 21, 2014 I hand poured plastic to fill the front part of the slot. Now even if I bite a segment or two off, I still have enough meat to thread on the jig. A 5/0 twistlock hook also fits real well in the little hook slot remaining. So I will Dremel the hookslot down to the third section and try that. Quote Link to comment Share on other sites More sharing options...
wishn4fishn Posted December 1, 2014 Report Share Posted December 1, 2014 There is a no hook slot option on this mold now. 2 Quote Link to comment Share on other sites More sharing options...
RAWJigs Posted December 1, 2014 Author Report Share Posted December 1, 2014 Good deal, with their sale going on I will be purchasing the 4 cavity mold Quote Link to comment Share on other sites More sharing options...
SNOWMAN CUSTOM BAITS Posted December 3, 2014 Report Share Posted December 3, 2014 There is a no hook slot option on this mold now.that sucks I ordered mine Friday and they didn't have or I didn't see the no hook slot mold. Quote Link to comment Share on other sites More sharing options...
Basseducer Posted December 3, 2014 Report Share Posted December 3, 2014 If your mold is new, ask them if you can swap it out. Quote Link to comment Share on other sites More sharing options...
SNOWMAN CUSTOM BAITS Posted December 3, 2014 Report Share Posted December 3, 2014 Yes it's new I haven't even revived it yet I will swap it out if I don't think I can live with it. Quote Link to comment Share on other sites More sharing options...
Yo Al Posted December 4, 2014 Report Share Posted December 4, 2014 If your mold didn't get shipped yet, call or email Bob. I ordered a 4cav Thursday and emailed him last night after seeing this post. This morning he changed my order to the no slot mold and said it should ship today. Excellent customer service Quote Link to comment Share on other sites More sharing options...
