robbor Posted December 8, 2014 Report Share Posted December 8, 2014 I few pic for those of you that may be thinking of building a spin casting machine. Some pics of exactly how it works so you dont have to reinvent the wheel. The main shaft with platten and pulley is mounted through (2) 1 1/4 flat pillow blocks. Then there is a secondary shaft below with a bearing that just pushes up on a shaft through the main pulley assemble which pushes on a steel plate and clamps the mold. Pretty simple actually. I bet you could make one for about $200 with ebay and lots of junk around. Quote Link to comment Share on other sites More sharing options...
BIGCREW Posted December 10, 2014 Report Share Posted December 10, 2014 What are you spincasting in it looks good great work Quote Link to comment Share on other sites More sharing options...
robbor Posted December 10, 2014 Author Report Share Posted December 10, 2014 I was just giving here a shake down and testing her out. Im going to be doing crappie jig heads. I just got the machine painted today and i have a second machine to go pick up. Industrial looking green hammered finish. Quote Link to comment Share on other sites More sharing options...
BIGCREW Posted December 12, 2014 Report Share Posted December 12, 2014 Looks like that thing will put out a serious amount of jig heads Quote Link to comment Share on other sites More sharing options...
