DaveG Posted December 31, 2014 Report Share Posted December 31, 2014 (edited) I sometimes get inconsistent results with Envirotex and get the bubble problem which sometimes if raining outside can be a real pain, Iv been thinking about it a lot of late and I decided to try some Etex in the microwave, I normally warm the bottles in warm water for half an hour before mixing which seems to help. But this time I measured out the etex into a small cup and microwaved the two parts for 30 secs before mixing, I could feel the etex getting warm as I mixed it in the cup, I then waited 5 mins then applied to two baits, the results were very little bubbles and the baits are touch dry in 4 hours, so far im very happy and reckon Im onto something Happy new year everyone Edited December 31, 2014 by DaveG 1 Quote Link to comment Share on other sites More sharing options...
mark poulson Posted December 31, 2014 Report Share Posted December 31, 2014 (edited) That's good to know. Thanks. Let us know if affects how the Etex holds up to fishing. Edited December 31, 2014 by mark poulson Quote Link to comment Share on other sites More sharing options...
