Saugerman Posted January 14, 2015 Report Share Posted January 14, 2015 I have watched videos of people thinning createx paint, and most say they use water and pledge floor shine. I have looked at several places, including Wal mart and can not find this product.. I have some made from the dollar store, but it does not say on it, what ingrediates are in it. Will most any floor shine product work, as long as it's clear? What do most of you use? Quote Link to comment Share on other sites More sharing options...
DaveG Posted January 14, 2015 Report Share Posted January 14, 2015 Have you tried Createx own brand of reducers? its what I use and get good results, I also use acrylics which I reduce down with window cleaner. Quote Link to comment Share on other sites More sharing options...
Ichthus Posted January 14, 2015 Report Share Posted January 14, 2015 the reason a lot of guys don't use the created brand stuff is because its somewhat expensive and not all craft stores carry it. I like to use isopropyl alcohol to thin my paints. works for createx and acrylics. the less alcohol % the more drying time it has. 70% works for me. Quote Link to comment Share on other sites More sharing options...
gone2long Posted January 14, 2015 Report Share Posted January 14, 2015 I use 5608 illustration base for standard Createx but if you have a wallmart near you go online and order the pledge future floor shine online and they will ship to your local store for pick-up that's how I did it. Quote Link to comment Share on other sites More sharing options...
Big Bass Man Posted January 15, 2015 Report Share Posted January 15, 2015 I used to use 4011 flash reducer by Auto Air. I now mix my own from a recipe on here http://www.tackleunderground.com/community/topic/28898-reducer/?hl=reducer Quote Link to comment Share on other sites More sharing options...
Anglinarcher Posted January 15, 2015 Report Share Posted January 15, 2015 Pledge floor shine is just clear acrylic, it is not a wax or polish at all. I find it works well enough, but I don't think it is needed. To be honest, if you have the right pressure, the right needle and nozzle on your brush, you really don't need any more then just a little water. I started out with the reducers, alcohol, no ammonia window cleaners (which are just alcohol) and if I let the bottle dry out from lack of use, a little water or reducers is important. If I don't let the bottle thicken up, I just don't need it. I guess I have used the air brush long enough now that it is just not a problem...... or maybe the Talon is just a really good air brush. Who knows for sure. Quote Link to comment Share on other sites More sharing options...
Wadeeng Posted January 15, 2015 Report Share Posted January 15, 2015 All Menard's stores carry that pledge product, that's were I get it. Quote Link to comment Share on other sites More sharing options...
Saugerman Posted January 15, 2015 Author Report Share Posted January 15, 2015 Thanks for the replies. I read the post about reducers and thinners Big Bass Man, and it was very helpful. As was all of the replies. I think I will try yet to get some of the pledge floor shine and give it a try first,,that many people can't be wrong.. 1 Quote Link to comment Share on other sites More sharing options...
BobP Posted January 15, 2015 Report Share Posted January 15, 2015 (edited) The stuff you're looking for is Pledge "Tile & Vinyl Floor FINISH with Future Shine". I don't use it because it has some downsides: it's scented, which I don't like. It will also weld your airbrush needle to the packing nut if you don't clean your airbrush carefully after using it - I had to use pliers to get the needle out of my airbrush after some dried in the barrel. I recommend you mix it in your paint immediately before spraying, not mixing a whole bottle of paint with it and storing it because sometimes, with some paints, it will cause the pigment to drop out of suspension into a very hard deposit on the bottom of the bottle, ruining the bottle. It's a strong acrylic finish and sprays nicely. Some guys use it as an acrylic clear over a paint scheme if they are having problems with solvent based topcoats causing their paint to wrinkle. It will save you some on paint, if you're into that. I'm not, so would rather go with another thinner on the rare occasions that I think I need one. Edited January 15, 2015 by BobP Quote Link to comment Share on other sites More sharing options...
Thinman13 Posted January 15, 2015 Report Share Posted January 15, 2015 I use the createx reducer they sell at Hobby Lobby. Water works but I was getting tip dry really quick. So I made a change and U don't need much. Quote Link to comment Share on other sites More sharing options...
bass100 Posted January 15, 2015 Report Share Posted January 15, 2015 I use to thin with pledge and water but now I just use water. Quote Link to comment Share on other sites More sharing options...
SLT785 Posted January 15, 2015 Report Share Posted January 15, 2015 I bought my Pledge at Lowe's, they had scented and un scented. Quote Link to comment Share on other sites More sharing options...
aulrich Posted January 15, 2015 Report Share Posted January 15, 2015 OK let me see if I got this Pledge floor finish is essentially a clear acrylic base? Could I then mix pledge with pearl powder (given the powder is fine enough to shoot) and make my own paint, I have this great rainbow trout pink from before I had colorant for my soft plastics that would be great to use. It could also be useful in making transparent colors it seems when you add enough reducer to get a color transparent the viscosity is so low it’s hard to use(at least for this newbie). Following the thought of grocery store chemicals a friend has recommended using the cleaning product “fantastic” vs window cleaner (the ammonia thing), he tells me that chemically it is basically the same as commercial airbrush cleaner. Can anyone confirm? Quote Link to comment Share on other sites More sharing options...
Anglinarcher Posted January 16, 2015 Report Share Posted January 16, 2015 Cannot confirm with the fantastic. Ammonia is considered bad on the Chrome of air brushes, so most advise to NOT use any ammonia window cleaner. The rest of the NON-ammonia window cleaners are just alcohol in water. I suspect that Fantastic would be a great cleaner for your air brush, but I would be reluctant to use it as a thinner for Createx. Yes, I have added color tint to the Future and I found it works just fine. I have even used the Future and added a little of the paint to create a 'candy' type coat, so ....... probably need a big needle to shoot any powder. Quote Link to comment Share on other sites More sharing options...
RayburnGuy Posted January 16, 2015 Report Share Posted January 16, 2015 (edited) it seems when you add enough reducer to get a color transparent the viscosity is so low it’s hard to use(at least for this newbie). To make paint more transparent you should be using a transparent base instead of a reducer. The reducer lowers the viscosity of the paint. (makes it thinner) The transparent base will keep the viscosity the same while making the paint more transparent. You may have to add both the reducer and the transparent base to get the paint to shoot like you want it to, but keep in mind that they're doing to different jobs. You can think of the transparent base as a paint with no colorant in it. By adding enough of the transparent base to your paint you can make the paint so transparent it will look almost like a candy paint and it will still shoot with no problems. Ben Edited January 16, 2015 by RayburnGuy Quote Link to comment Share on other sites More sharing options...