Predator Bass Baits Posted February 6, 2015 Report Share Posted February 6, 2015 Has anyone tried this. I had a guy call me today and he said he uses it and coats about 700 lures a day with it. http://www.creativewholesale.com/ProductDetail/tabid/174/ProductID/15/Default.aspx?SortField=free3+desc%2Cproductname Quote Link to comment Share on other sites More sharing options...
21xdc Posted February 6, 2015 Report Share Posted February 6, 2015 That's just a different Envirotex product... Quote Link to comment Share on other sites More sharing options...
Predator Bass Baits Posted February 6, 2015 Author Report Share Posted February 6, 2015 So nothing special then ? Quote Link to comment Share on other sites More sharing options...
RayburnGuy Posted February 6, 2015 Report Share Posted February 6, 2015 There are some differences although I don't remember what they are. Ex-74 has been discussed before so you might find more info in the archives. Ben Quote Link to comment Share on other sites More sharing options...
bass100 Posted February 6, 2015 Report Share Posted February 6, 2015 The EX-74 has some UV inhibitors put into it. I read were the test results didn't show any difference though. Quote Link to comment Share on other sites More sharing options...
bobv Posted February 6, 2015 Report Share Posted February 6, 2015 (edited) EX-74 EX-74 is an extremely clear, tough, high gloss surface coating formulated to produce a deep glass like appearance in a single layer on a sealed surface. Two or more layers are often applied for added depth and protection.EX-74 has been formulated with UV inhibitors to reduce yellowing of epoxy coatings. EX-74 is not weather resistant and is not recommended for unprotected exterior use. Exterior use will cause a chalky surface requiring sanding and recoating to restore the glossy surface.EX-74 has an extended "open time" which allows up to 25 minutes in the mixing container at 70º F and up to one hour working time on the surface being coated. Not recommended in freezing climates due to possibility of de-lamination.Always seal porous surfaces such as wood or canvas with a thin brushed on layer of EX-74 before pouring a top coat. See instructions in the link below for full details. Edited February 6, 2015 by bobv Quote Link to comment Share on other sites More sharing options...
mark poulson Posted February 6, 2015 Report Share Posted February 6, 2015 Call E tex support. They are very helpful. Quote Link to comment Share on other sites More sharing options...
saltshaker Posted February 8, 2015 Report Share Posted February 8, 2015 "700 lures a day"???????? Quote Link to comment Share on other sites More sharing options...
Salty's Posted February 8, 2015 Report Share Posted February 8, 2015 Some like to ummm...exaggerate a bit? I'd like to see anyone brush coat 700 lures a day. Good luck with that. "700 lures a day"???????? Quote Link to comment Share on other sites More sharing options...
fatfingers Posted February 10, 2015 Report Share Posted February 10, 2015 Envirotex lite is also "not recommended" for exterior use. It also lacks the UV protectors found in EX-74 which can have the effect of inhibiting the fading which is common with certain pigments such as red, orange, etc. I've been using the 74 for years and have had zero problem with chalking. Now I could imagine that being a problem with about any topcoat designed for exterior usage if one were to build say a picnic table and expose it to the elements year round. Quote Link to comment Share on other sites More sharing options...
fatfingers Posted February 10, 2015 Report Share Posted February 10, 2015 Sorry, I meant to say, "designed for INTERIOR usage." Quote Link to comment Share on other sites More sharing options...
