Who Makes This Jig?

[nedyarb]

Sorry about this pic....but does anyone make this jighead mold?

[nedyarb]

Zoomed pic

[cadman]

Looks like a Hack Attack jig, they are usually bigger bodied with a heavy hook. Don't know of any mold for it, however you can modify a sparkie jig mold or a bullet bass jig mold.

Edited February 26, 2015 by cadman

[nedyarb]

I have a bullet mold. How would you recommend modifying it?

[cadman]

If you need a bigger body profile you will have to dremel out the body sides. The Hack Attack has a strong 30 degree Gami hook, so you will might have to modify the hook eye and or the hook shank on the mold halves. As I look at your pic closer, it look like a flat eye hook, if that is the case, then you will have to cut the mold for that as well. Also if it is a flat eye, then it isn't a Hack Attack. Layout what you want to do first , get a game plan and then proceed. Make sure you can get the hooks and the hook sizes you want to use.

Edited February 27, 2015 by cadman

[smalljaw]

To me it looks like an All Terrain A.T. jig which has a recessed flat eye hook I believe. The only thing close to it in a mold would be the Brush Jig, unless you go custom. Shawn Collins makes a stand up jig with a similar profile, look up CNC-Works on ebay, the mold is costly but it uses a Mustad 32796 jig hook.

[nedyarb]

Thanks