Acuna Posted March 7, 2015 Report Share Posted March 7, 2015 I am looking at giving up using my Lee bottom pour pot due to frustration with it clogging and switching to a regular Lee pot and ladle to pour jigs. Does anyone have any experience using a regular pot and ladle to pour the following molds: 1. Collins Custom Molds standup flipping jig with horizontal line tie. 2. Do It Arkie jig mold (1/4, 3/8, 1/2) 3. Do it Football Shakeyhead mold 4. Do It Football jig (1/2, 3/4) Thanks in advance. Quote Link to comment Share on other sites More sharing options...
cadman Posted March 8, 2015 Report Share Posted March 8, 2015 (edited) Yes a small ladle will work just fine. However, when I have problems with pouring from my bottom pour,, I use a ladle and just take the lead out from the top. However if your pot is not heating enough, then that won't work. Below is the ladle I have and I recommend. It hold 1-1/2 oz of lead, and it is very light, so it's easy on the hands. It is about $7 and all of your tackle component places sell them. You have a PM from me. Edited March 8, 2015 by cadman Quote Link to comment Share on other sites More sharing options...
