nedyarb Posted April 1, 2015 Report Share Posted April 1, 2015 First off don't hold me accountable if your microwave sparks. But so far im happy with my results. I bought a piece of galvinized flashing at home Depot. Its black on one side and gray on the other. I melted 2 cups of old remelts in a 2 cup anchor cup. Then cut the cooled plastic in half so i could trace an outline onto my flashing and then cut it with tin snips. I used 5 minute jb weld clear epoxy, to glue the flashing to the cup,but added a couple drops of black plastisol colorant to hide and flashy metal. Heres the result and no sparks in the micro. It makes more of a swirl than a laminate but I think cooler plastic might work better. Good luck 1 Quote Link to comment Share on other sites More sharing options...
Jig Man Posted April 1, 2015 Report Share Posted April 1, 2015 I don't put my divided cup in the microwave. I warm it up on a griddle while I melt the 2 colors in my nor por cups. I pour them into the divided cup then use it on my molds. 1 Quote Link to comment Share on other sites More sharing options...
Big Ray Posted April 3, 2015 Report Share Posted April 3, 2015 Wow that is pretty badass. The funny thing is I was going to ask about this today. I just remembered reading this article when I first got into making my own plastics http://www.bassmaster.com/tips/pouring-soft-plastics-part-3# It mentions making a cup like the one you made. Quote Link to comment Share on other sites More sharing options...
nova Posted April 3, 2015 Report Share Posted April 3, 2015 I've had a split cup and used it in the micro thousands of times over the last 10+ years with no problems. I also made a cup with 3 chambers. What you have to worry about is the shiny parts of the metal showing; those will spark in the micro. I use a black marker on the outside of the cup to hide the edges of the metal that show through the glass. If the cup is done correctly it will work in the micro; I'd be more afraid of the griddle as I have had pyrex explode on me before. I was never so thankful for wearing corrective glasses. Quote Link to comment Share on other sites More sharing options...
