a1712 Posted May 6, 2015 Report Share Posted May 6, 2015 I'm trying to give Calhoun Plastisol a go but am having problems with air bubbles. I'm using a steel mixing rod and not stirring vigorously. Any help would be appreciated. I've always used Lure Craft and have never had this issue before. Thanks all, Brian. Quote Link to comment Share on other sites More sharing options...
alsworms Posted May 6, 2015 Report Share Posted May 6, 2015 If you search the forums for "bubbles in plastic," you'll find we've talked about this one a bunch. Quote Link to comment Share on other sites More sharing options...
MonteSS Posted May 6, 2015 Report Share Posted May 6, 2015 Get Baitjunkys de-gassed. It is Calhouns but put in a vacuum I believe. Maybe you can rig up a vacuum to yours. Quote Link to comment Share on other sites More sharing options...
a1712 Posted May 6, 2015 Author Report Share Posted May 6, 2015 I've searched the forum threads, but have never seen an answer. I'm going to give it another go this afternoon. I'll try some of the suggestions mentioned and see how it goes. I have never had this happen before. Brian. Quote Link to comment Share on other sites More sharing options...
Apdriver Posted May 7, 2015 Report Share Posted May 7, 2015 Try heating it and letting it sit for a minute. Most of the bubbles will rise to the top. Quote Link to comment Share on other sites More sharing options...
a1712 Posted May 7, 2015 Author Report Share Posted May 7, 2015 Got it figured out this afternoon. Thanks for all the help, it was a gas problem. Shot enough swimmys to choke a whale today. Thanks again, Brian. Quote Link to comment Share on other sites More sharing options...
