Beamer2 Posted July 1, 2015 Report Share Posted July 1, 2015 Looking for a swimbait head mold similar to the J-Will or SK Squadron heads with similar keepers? Looking for 1/8, 1/4 and 3/8 oz. sizes, with hook sizes of 3/0 and 4/0. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
smalljaw Posted July 2, 2015 Report Share Posted July 2, 2015 You need a custom mold made, that will run some serious coin so if you don't go through many it won't be worth it. Nothing made that is close enough. Quote Link to comment Share on other sites More sharing options...
Beamer2 Posted July 2, 2015 Author Report Share Posted July 2, 2015 Thanks smalljaw, kind of what I figured. I figured I would ask anyways. They are great swim bait heads but expensive in the stores. I'll just have to keep looking for them on sale and by guys selling them. thanks again. Quote Link to comment Share on other sites More sharing options...
BULLET21 Posted July 12, 2015 Report Share Posted July 12, 2015 The brush jig makes a decent swimbait head. Just cut off a base pin to keep the weedguard hole from pouring. Quote Link to comment Share on other sites More sharing options...
HookUp Posted August 27, 2015 Report Share Posted August 27, 2015 (edited) I made from from a Do It SWM mold, a dremel, and multiple pours until I got it right. Since 3/8oz is to big for my fishing, filled the mold 1/2 w/ JB Weld and have a 3/16oz. Google around and you'll find the article I wrote with details on a couple boards. If you cant find it, I'll find it & post a link. Edited August 27, 2015 by HookUp Quote Link to comment Share on other sites More sharing options...
