steelhead11 Posted July 6, 2015 Report Share Posted July 6, 2015 Anyone have any BLN or saltwater hook suggestions for the Do-it SWM (goofy jig like) mold?? thanx Quote Link to comment Share on other sites More sharing options...
cadman Posted July 6, 2015 Report Share Posted July 6, 2015 (edited) If you are looking for a BLN hook for the SWM-3-A mold, then you will be pretty hard pressed to find one that just fits perfectly. You will have to modify your mold extensively to do this, and also the hook will be too big for the cavity, because of the small profile of the jig head. You can try to use a Mustad 32886, and go from there. Edited July 6, 2015 by cadman Quote Link to comment Share on other sites More sharing options...
steelhead11 Posted July 6, 2015 Author Report Share Posted July 6, 2015 Thanks for the prompt response cadman. I ordered those exact hooks from Barlow's a few days ago. Those SWM/goofy-like jigs can put a hurtin on some pompano. The bronze Eagle Claw 2190B ain't quite cutting it though. Thanks again Quote Link to comment Share on other sites More sharing options...
cadman Posted July 7, 2015 Report Share Posted July 7, 2015 steelhead, Unfortunately the bronze Eagle Claw are too weak for your application. Do-IT should have made that jig from the get-go with a stronger hook. BTW welcome to Tackle Underground. Quote Link to comment Share on other sites More sharing options...
