SLT785 Posted July 7, 2015 Report Share Posted July 7, 2015 Has anybody used Createx's AutoBorne Sealers? http://www.autoborne.com/sealer.html Quote Link to comment Share on other sites More sharing options...
ddl Posted October 7, 2017 Report Share Posted October 7, 2017 not even one guy is using autoborn or auto air sealer? was planing to use that over epoxy as a primer ,is that a good idea? Quote Link to comment Share on other sites More sharing options...
MSUICEMAN Posted October 7, 2017 Report Share Posted October 7, 2017 Still using the 4000 series sealers that it replaced. Just ordered some of the new stuff. 1 Quote Link to comment Share on other sites More sharing options...
ddl Posted October 7, 2017 Report Share Posted October 7, 2017 and do you think it grab better than regular createx white over epoxy ? Quote Link to comment Share on other sites More sharing options...
Tronicsman Posted October 8, 2017 Report Share Posted October 8, 2017 I use createx white sealer. I think it’s better than just createx opaque white. 1 Quote Link to comment Share on other sites More sharing options...
AZ Fisher Posted October 8, 2017 Report Share Posted October 8, 2017 http://www.coastairbrush.com/proddetail.asp?prod=AutoBorne_Transparent_Sealer Your link did not work. This is what I have been using on wooden swimbaits. My link says transparent but I use white. It taken several coats for good coverage and then needs to sanded before painting. I have a pint bottle and tend to get small dry pieces in the sealer from the lip of the container and the inside of the cap even after cleaning both when resealing the bottle. I shake well and strain before each use. My .02 On 7/6/2015 at 5:29 PM, SLT785 said: Has anybody used Createx's AutoBorne Sealers? http://www.autoborne.com/sealer.html Quote Link to comment Share on other sites More sharing options...
ddl Posted October 8, 2017 Report Share Posted October 8, 2017 im sure the guy don't care ,this post is 2 years old lol,but i care. so you use it as a sealer not as a primer?what's the grit of that sanding paper that you use? Quote Link to comment Share on other sites More sharing options...
rui Posted October 11, 2017 Report Share Posted October 11, 2017 (edited) I've used the sealer and have mixed feelings about it. Used it as a primer only. It sticks well to wood, paint sticks well to it, but i find it a little thin, especially if you thin it as recommended. Edited October 11, 2017 by rui Quote Link to comment Share on other sites More sharing options...
