Phenix72 Posted July 13, 2015 Report Share Posted July 13, 2015 Hello, For a maintenance, I need to know what bearing mounts the W & mcgill Victory Skeet Reese Baitcaster reel. Someone replaced them? If possible it would take measures. Thanks Quote Link to comment Share on other sites More sharing options...
Musky Glenn Posted July 29, 2015 Report Share Posted July 29, 2015 You can probably go to this web site and find the info you need. Musky Glenn http://www.wright-mcgill.com/skeet-reese-2/skeet-reese-victory-reels Quote Link to comment Share on other sites More sharing options...
Phenix72 Posted August 8, 2015 Author Report Share Posted August 8, 2015 Thank's Musky! Quote Link to comment Share on other sites More sharing options...
BobP Posted December 21, 2015 Report Share Posted December 21, 2015 Reel bearings are measured in whole millimeters and it's easy enough to measure one with a simple ruler. The nomenclature is hole diameter x bearing thickness x bearing outside diameter. The vast majority of modern freshwater baitcasters use 3 x 4 x 10 mm bearings for their spool bearings. You can measure any reel bearing this way but personally, I've never had to replace any bearing in a reel except for spool bearings which are the only ones that operate at high speed. But you can also measure a bushing the same way and replace it with a bearing, if you desire. 1 Quote Link to comment Share on other sites More sharing options...
