Bassin Jack Posted August 10, 2004 Report Share Posted August 10, 2004 First off hi all. I have been looking to try to make my own worms. I was just curious what should be on my shopping list to get started? What would you guess my start up cost would be? Thanks for the help in advance. Quote Link to comment Share on other sites More sharing options...
woodsac Posted August 10, 2004 Report Share Posted August 10, 2004 BJ, Welcome aboard! Before you dive in, read the 'Plastic 101' tutorial in the How-To section. http://www.tackleunderground.com/mx/index.php?page=10&mode=article&k=13 Then do a search under soft plastics for 'start up' and 'beginner'. You'll find some more good advice for colors and supplies. Quote Link to comment Share on other sites More sharing options...
Tm Customs Posted August 10, 2004 Report Share Posted August 10, 2004 Personally I suggest Plaster A Paris you cab buy it at walmart for 5- per. 8lbs, it is easier to work with and cheap so if you mess up no biggie. First go to a thrift store and buy a bunch of containers tuperware and anything else that is the right size. Then lots of super glue so the baits are secured good to the surface so the dont move and kill your molds. Once you make the molds you can coat them in either fiberbglass resin or devcon 2ton epoy or engine spray paint. If you want to make zipper molds you will have to use resin for those. Quote Link to comment Share on other sites More sharing options...
