Jig Man Posted August 23, 2015 Report Share Posted August 23, 2015 I've been looking at Bait Junkys spade tail grub mold and it is listed as no knobs included. Are these knobs for screwing the sides of the mold together or something else? I've never had one of their molds. Quote Link to comment Share on other sites More sharing options...
MonteSS Posted August 23, 2015 Report Share Posted August 23, 2015 Yes screwing the two halves shut. Quote Link to comment Share on other sites More sharing options...
DaBehr Posted August 23, 2015 Report Share Posted August 23, 2015 Make sure you select the option to include 2 knobs. After you have a bunch of molds you won't need more knobs! Quote Link to comment Share on other sites More sharing options...
Jig Man Posted August 23, 2015 Author Report Share Posted August 23, 2015 (edited) Thanks Monte. That's what I assumed but wanted to be sure. Bob I have some molds that have to be clamped. They are not my favorites. Edited August 23, 2015 by Jig Man Quote Link to comment Share on other sites More sharing options...
mark poulson Posted August 24, 2015 Report Share Posted August 24, 2015 I find, if the mold has alignment pins, clamps are a lot faster than screw-on knobs. Quote Link to comment Share on other sites More sharing options...
JRammit Posted August 24, 2015 Report Share Posted August 24, 2015 All my molds are plaster, i made one with built in screws.. Ill never make another one, clamps are faster and easier! Quote Link to comment Share on other sites More sharing options...
Apdriver Posted August 24, 2015 Report Share Posted August 24, 2015 Usually, I'll shoot 5 or 6 molds at the same time. It's just easier to clamp them all together. Makes de molding much quicker and easier. I never use the knobs. Quote Link to comment Share on other sites More sharing options...
Driftwood Posted August 24, 2015 Report Share Posted August 24, 2015 Clamps are much faster. Quote Link to comment Share on other sites More sharing options...
FATFLATTIE Posted August 31, 2015 Report Share Posted August 31, 2015 Some molds or certain applications where I have to inject harder I like the screws because there is no way to blow the mold out. I like the option to use the mold either way. Quote Link to comment Share on other sites More sharing options...
